Manufacturers of pools now offer several varieties of domestic pond and a huge number of models. To determine exactly which one is right, you need to study several parameters:
Assess the size of the suburban area and, based on them, choose the size of the pool.
To decide on whether you really want to have your own pond at the cottage.
In what conditions will the device be used: year-round or only during the warm season.
Is it necessary to have a mobile version and whether it will be necessary to transform it.
Regardless of the design of the dacha reservoir, it requires mandatory care. At the same time, a pool that is not protected by an awning or a roof is contaminated much faster than a closed one. Therefore, before installing an artificial reservoir, it is necessary to choose the best option for its purification.To collect small debris remaining on the surface of the water surface, use special nets. This option is suitable in the presence of small structures. To cope with this task in large volume, use special water vacuum cleaners.
To clean the bottom and walls of dirt get special filter pumps with sand filters. It is necessary to accurately determine the power of the filter, which depends on the type of design.
Any pool needs to be decontaminated from time to time so that it performs its tasks well. To obtain clear clean water, it is disinfected using chemical reagents. It can be liquid oxygen, chlorine or bromine. With the help of these substances, you can change the indicator of hardness, to eliminate turbid sediment and get rid of the growth of algae. If you do not use chemistry to disinfect the dacha reservoir, in a short time the pool will become a flowering pond.
A pool in the country is not just entertainment for a large company, but also an object that requires constant attention. You need to be prepared for the fact that at any time there may be all sorts of trouble, as well as regularly hold activities to maintain the reservoir clean.
One of the troubles with water can be its "bloom". In this case, the water gets a green tint due to algae reproduction in it or the presence of a large amount of metals.You can get rid of algae by adjusting the acidity of the water, and then adding a large dose of chlorine and preparations that prevent the development of algae. To reduce the metal content, a lot of chlorine is also first introduced. Then a filter is turned on and a special substance is injected, which collects small particles of metals into large ones. After that, the dirt is removed mechanically.If the water has become rusty, then its acidity is below normal. You can solve the problem by adjusting this figure.
Sludge can form on the bottom and walls. If this happens, then there are organic substances in the water, which are not only a source of pollution, but can spread the infection, so you need to immediately clean the structure.
To cope with the turbidity of water will help add high-speed shock-chlorine or a means intended to soften the water. These drugs should be used strictly according to the instructions.
Pool water can be cleaned in different ways. Many manufacturers in a wide range produce a variety of water purification products. It is best to use products that include chlorine, bromine or active oxygen. It is easiest to clean the pool with a chlorine-containing preparation, since such a tool does not adversely affect the skin.
Preparations with bromine make it possible to purify water as well, but they are much more expensive. Such funds are used mainly in the closed varanth, for which a higher temperature is maintained.
If the temperature of the water in the pool does not exceed +25 degrees, then an excellent result can be obtained with the help of preparations in active chlorine.
If you have a suburban area of considerable size, you can install a stationary plastic pool. Such an artificial reservoir is suitable for those people who have precisely defined their size and appearance and have enough material resources to carry out earthworks. Plastic cups are installed for a long time, they are not dismantled with the onset of autumn, and for their installation it is necessary to dig a large hole.The shape of the pool of plastic is a bowl of a special composition that is resistant to chemical reagents and a variety of mechanical damage. The shape of the bowl can be very different - from standard round, oval and rectangular to asymmetrical with smooth contours, cast steps and height differences. Bowl walls can be up to 1 cm thick.
The surface of such a device does not need additional processing, since all bowls are made only in factory conditions. The largest reservoirs of plastic can have a capacity of up to 9000 liters, so they are suitable for swimming, diving, and entertainment.
To install such a pool, you must dig a pit and prepare a concrete pad or formwork. Such options can be used all year round. To this end, the model is installed in a covered pavilion and the water purification system, water supply and discharge mechanism are installed.
The disadvantages of plastic pools include their large size and high cost. To bring such a bowl to the country requires a special cargo transport, and for installation requires special equipment. Before installing a plastic device, you need to prepare the area for several days.
The peculiarity of the pool frame type is that its design is collapsible. Externally, such a reservoir looks like a frame with a round, oval or rectangular frame, filled with water. The edges of such a device are smooth, from the inside are made of durable PVC film. The purpose of the frame is to give it shape and reduce the pressure of a large volume of water on its walls. In summer, this type of construction is easy to install in the place chosen at the cottage, and after the end of the swimming season, the model is quickly dismantled and sent to storage.The frame pool possesses a reliable and steady design which will serve long time. Such an option can have impressive dimensions: a capacity of up to 250 m3 of water and a depth of 2 m. Such dimensions make it possible not only to play in the water, but to fully swim and even dive.
Disadvantages of such a device too. Among them is the need for a protective tent to avoid contamination. Filling and draining water in such a large tank requires time and effort. In addition, for the mandatory regular purification of water requires a special cleaning system. Additional accessories for the frame option are often very expensive.
Such a design is arranged once and for several decades, and its installation requires significant financial costs. To make a concrete pool beautiful and memorable, the walls and the bottom lay out mosaic or decorative tiles. The shape of the bowl of concrete can be very different, they often make a drop in depth, set, if desired, a tower for jumping, mount a massage device.In order to be able to use the device all year round, they often make a sliding or removable roof over it and install a pavilion. Before the installation of a concrete variant, it is imperative to make a preliminary draft, install and install underground utilities. To create a concrete structure of the reservoir requires complex installation work.
These reservoirs are compact, have a very simple structure and are inexpensive. Therefore, such options are very popular among the owners of summer houses. For the manufacture of such a device is used durable polyvinyl chloride film. Externally, it looks like a double case with a hollow chamber into which air is pumped to create a form of water.The reservoir with an inflatable design has the small size and, as a rule, a round form. The largest diameter of such an inflatable structure is about 5 m, and the depth does not exceed one and a half meters. In the upper part of the inflatable structure there is a special ring that acts as a holder for a large amount of water. In the filled form, the wall is stretched, which is why the reservoir looks like a bowl, and its diameter becomes smaller. To increase the strength and stability of the design, special holders, made of thin-walled aluminum tubes, are used. Inflatable options for babies are shallow with a soft bottom and sides.
Such inflatable structures are easy to transport, they do not require special conditions for transportation. To install such a pool, you need only a flat platform.
The disadvantage of an inflatable device is that they need to be pumped up from time to time, and the hull is easily damaged. Since inflatable structures are poorly adapted to the purification of water, it must be changed frequently.